Motul DOT 4 Brake Fluid 100ml – Motorcycle Brake Fluid

Motul DOT 4, 100ml

Available in Bangladesh as a small pack, Motul DOT 4 Brake Fluid 100ml is meant for systems specified for DOT 4. Since brake fluid is what transmits pressure through the hydraulic circuit, getting the spec right matters more than the bottle size. Planning a service? Check the manual and the reservoir cap marking before picking this compact bottle.

Fitment and use

A small pack makes it easier to buy close to a measured requirement, yet 100ml is no guarantee of a complete fluid change. How much you need depends on the circuit and the bleeding method. If the level keeps dropping or there's a leak, get it inspected; topping up isn't a fix.

Before you open it

Keep the cap tightly shut and work to the vehicle's service manual. Check that the pack is sealed and that the DOT marking and product label are correct. We don't attach boiling-point numbers, racing claims or low-viscosity approvals from other Motul brake fluids to this product.

Confirm DOT 4 first

The manual and the reservoir should both state which fluid the system takes. A 100ml bottle is convenient, but convenience says nothing about compatibility with the hydraulics. If the marking is hard to read, or someone has already filled the system with an unknown fluid, ask a service technician.

Reading the 100ml size

The volume printed on the bottle is simply what you're buying, not what your brake circuit needs to be bled or refilled. Figure out the service amount before breaking the seal. If more is required, keep to the right spec all the way rather than grabbing a different product just because it's in stock.

Brake fluid vs brake cleaner

Fluid lives inside the hydraulic circuit. A brake-cleaner spray is for wiping down suitable parts and should never go into the reservoir. When you compare brake-fluid prices in Bangladesh, search for Motul DOT 4 100ml by its full name and size.